✿ Halloween wallpaper (part 2)

BACKGROUND
1. File > place

2. choose the file to place 

3. select blend mode(SHIFT+ALT+Y) (luminosity) & opacity (92%) > select curves in the red circle >  press ALT + click the line diving 2 layers(CTRL+SHIFT+G)(create a clipping mask)  an arrow will shown in the red circle

4. file > place > choose file to place it > place at the position I want

5 . edit > transform > scale > resize the haunted house

6. choose blend mode(SHIFT+ALT+Z) (pin light)

7. select the brightness/contrast layer in the red circle

8. press ALT + click the line diving 2 layers(CTRL+SHIFT+G)(create a clipping mask) an arrow will be shown > adjust the brightness (-15) & contrast (49) by dragging the little slider

9. layer > layer mask > hide all

10. select dodge tool(O) > paint over the area I place it until the haunted house appear

11. haunted house appear

TEXT

12. select horizontal type tool(T) in the small red circle > choose foreground colour(white) in the big red circle > select font(berylium) & size(60) > type HAPPY

13. select horizontal type tool(T) > choose foreground colour(white) > select font(berylium) & size(120) > type HALLOWEEN > place both of the text in a nice position

14. hold ctrl & click on both of the text layer > right click > rasterize type

15. select smudge tool > mode(normal)> strength (50%)>select halloween layer > drag the text

16. result of using smudge tool

17. hold ctrl + left click on the halloween text layer ( a selection will appear )> select new fill /adjustments layer in the red circle > select colour balance

18. adjust the colour balance of  cyan.magenta & yellow of 3 tones (shadows,midtones,highlights) by dragging the slider

19. select horizontal type tool(T) > choose foreground colour(black)> same size+ type> place it over the first "halloween" text

20. select blend mode(SHIFT+ALT+H) (hard mix)

21. double click on the "happy" text layer > styles ( outer glow) > structure mode(screen) ,opacity(75%) & colour (green) > gradient editor (location 56)(green colour)

BLACK CAT

22. file > place > choose file > resize it & place at the position I want > rename the layer (black cat)

23. move the black cat layer to below of the "happy" text layer (so the cat show behind of the text) > layer > layer mask > hide all

24. select dodge tool (O)>set the diameter of the brush(32)(ALT+right click+drag) >range(shadow) >exposure(100%)> paint over the area I placed it until the black cat appear

JACK O LANTERN

25. file > place > choose file > place the bat-jack o lantern 

26. rename the layer (bat-jack o lantern) by double click on it > drag the layer above the black cat layer >layer > layer mask> hide all

27. select dodge tool & burn tool(O) > set the size of brush (27)(ALT+right click+drag), range (shadows),exposure(100%) > paint over the area I placed it  until the bat-jack o lantern appear

SCARY EFFECT & TEXT EFFECT

28. file > place > place the cracking painted picture > resize & rotate it 

29. select blend mode (SHIFT+ALT+O)(overlay)

30. edit > transform> warp

31. drag the points & adjust it until fix to the face 

32. layer > layer mask > hide all 

33.select dodge tool (O) [brush (38),range (shadows),exposure(75%)] & burn tool(O) > paint over the face until the cracking part appear 

34. select sharpen tool ( to sharpen cracking parts ) & blur tool (to blur cracking parts) > click over the cracking parts

35. select burn tool layer > select erase tool(E) > set brush (26)(ALT+right click+drag),opacity (57%) mode(brush) > erase some parts of the face which in the red circle

36. select the cracking paint layer > rename it (cracking paint)

37. select Halloween text layer >right click> select duplicate layer

38. hold ctrl +left click over the layer (a selection on the text will shown) > rename the layer(halloween 1)

39. edit > transforms > flip vertical

40.  filter >blur> gaussian blur

41. adjust the radius of gaussian blur (1.1 pixels) by dragging the slider

42. select halloween 1 layer > click add vector mask (in the red circle)

43. make sure foreground is black in colour> select gradient tool(G) > hold shift + hold left click & drag it straight down till reach the position I want then release it ( a straight line will shown)

44. result of gradient & adjust opacity (93%)

45. edit > transform > skew

46. drag the points & adjust it

47. click add new layer in the red circle

48. select horizontal type tool(T) > select foreground colour (white) > set the font (Berylium), size(30pt) > choose a position & type it

FINAL

✿ Halloween wallpaper (part 1)

My halloween wallpaper

GUY'S FACE

2. file > new( ctrl+N)> name it > preset (international paper) > size (A4) > resolution (72)

3. select paint bucket tool ( G ) > select the foreground colour ( BLACK ) > click over the white background

4. black background appear

5. file > place 

6. choose the file to open it

7. resize > place the guy to the right side > place half of the face of the guy > rename the layer (make up guy)

8. press Q (enter quick mask ) > select brush tool (B)

9.paint over the guy's face

10. press Q again (exit quick mask ) > a selection will appear ( background & the face of the guy)

11. select > inverse (shirt+ctrl+I)

12. the selection will appear only on the face of the guy

13. click add vector mask which in the small red circle at the right bottom.
the result after click the add vector mask in the big red circle

14. click the add new layer in the red circle > rename the layer( eye colour layer) by double click the layer 

15. select brush tool (B)

16. click the foreground colour ( the black square ) in the red circle & choose colour (orange) 

17. adjust the diameter of the brush tool (42px) (ALT+right click+drag) & the hardness (100%) . opacity (100%) & flow(100%) 

18. paint the guy's eye

19. double click on the eye colour layer > set the blend mode (normal > colour(Shift + Alt + C) > make sure PREVIEW box is checked

20. select eraser tool (E)

21. erase unwanted part around the area of the eye

22. select the colour balance in the red circle

23. press ALT + click the line diving 2 layers(CTRL+SHIFT+G)(create a clipping mask)  an arrow will shown in the red circle

24. adjust the colour balance by dragging on the little slider of cyan , magenta & yellow

25. select dodge tool (O) paint (inside the pupil) & burn tool(O) paint (outside the pupil) on the eye colour layer > range (shadow) & exposure (100%) > paint it - to enhance the eye 

26. right click on the make up guy layer > choose duplicate layer

27.  press ALT + click the line diving 2 layers(CTRL+SHIFT+G)(create a clipping mask)   
an arrow will be shown in the red circle

28. select burn tool (O) > adjust the diameter of the burn tool (100px)(ALT+right click+drag) & hardness (0%)(ALT+SHIFT+right click+drag) > range (shadow)& exposure (100%)

29. paint some part of the guy face

GAL'S FACE

1. file > place

2. choose file to place it

3. resize & place at the left hand side

4. select brush tool (B) & press Q (enter quick mask)

5. paint over the gal's face

7. press Q (exit quick mask) > a selection will appear ( background & the face of the gal) > select > inverse (SHIFT+CTRL+I) then the selection will only on the gal's face

8. click the add new layer in the red circle > rename the layer (eye colour 1) by double click on the layer

9. select brush tool (B) & colour of the foreground (green) then paint the eye

10. choose blend mode (SHIFT+ALT+V)(vivid light)

11. select eraser tool (E) to erase unwanted part of the eye

12.  press ALT + click the line diving 2 layers(CTRL+SHIFT+G)(create a clipping mask) , an arrow will shown in the red circle.

13. create a new layer > rename the layer (eyeshadow)> select brush tool (B) > select color (yellow) of the foreground > paint it > repeat it again by choosing another 2 colors (orange & green)

14. choose blend mode (SHIFT+ALT+C)(colour)

15. filter > blur > gaussian blur 

16. gaussian blur > drag the cursor over the little slidder to adjust the radius

17. result of gaussian blur

18. choose gaussian blur again > adjust the radius -to make the eye shadow more blur


19. right click on the gal layer > select duplicate layer > rename ( liquify)

20.  press ALT + click the line diving 2 layers(CTRL+SHIFT+G)(create a clipping mask)   > filter > liquify

21. select forward warp tool (W) > set the brush size (121), brush density (13),brush pressure (90) & drag to adjust the shape of gal's face


22.right click on the liquify layer > select duplicate layer > rename it (burn tool) >  press ALT + click the line diving 2 layers(CTRL+SHIFT+G)(create a clipping mask)  


23. select burn tool (O) & paint around the gal's face

24. create a new layer > rename it (gradient) > select gradient tool (G)> select foreground to transparent which in the red circle located at the option bar > hold shift +left click & drag it straight down till reach the position I want then release it (a straight line shown )

25. this is result of gradient .then select dodge tool (O) > select the guy layer > set the diameter of brush(ALT+right click+drag) > range (highlights)> paint over the guy's pupil

26. select dodge tool(O) > set brush diameter (ALT+right click+drag) > range (highlights) > paint over the pupil+face+hair of the gal & guy 

27 .result of dodge tool

 result of  gradient